EasyManua.ls Logo

Vertex Standard FT-950 - Specifications

Vertex Standard FT-950
137 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FT-950
Operating Manual
Vertex Standard Co., Ltd.
134
Specifications
General
Rx Frequency Range: 30 kHz – 56 MHz (operating)
160 - 6 m (specified performance, Amateur bands
only)
Tx Frequency Ranges: 160 - 6 m (Amateur bands only)
Frequency Stability: ±0.5 ppm (after 1 minute @77 °F [25 °C])
±1.0 ppm
(after 1 minute @14 °F ~ +122 °F [–10 °C ~ +50 °C])
Operating Temperature Range: 14 °F ~ +122 °F (–10 °C ~ +50 °C)
Emission Modes: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM),
F1B (RTTY), F1D (PACKET), F2D (PACKET)
Frequency Steps: 1/10 Hz (SSB, CW, & AM), 100 Hz (FM)
Antenna Impedance: 50 Ω, unbalanced
16.7 - 150 Ω, unbalanced
(Tuner ON, 160 - 10 m Amateur bands, TX only)
25 - 100 Ω, unbalanced
(Tuner ON, 6 m Amateur band, TX only)
Power Consumption (Approx.): Rx (no signal) 2.0 A
Rx (signal present) 2.5 A
Tx (100 W) 22 A
Supply Voltage: DC 13.8 V ± 10% (Negative Ground)
Dimensions (WxHxD): 14.4” x 4.5” x 12.4” (365 x 115 x 314.5 mm)
Weight (Approx.): 28.7 lbs (13 kg)
Transmitter
Power Output: 5 - 100 watts (2 - 25 watts AM carrier)
Modulation Types: J3E (SSB): Balanced,
A3E (AM): Low-Level (Early Stage),
F3E (FM): Variable Reactance
Maximum FM Deviation: ±5.0 kHz/±2.5 kHz
Harmonic Radiation: Better than –60 dB
(160 - 10m Amateur bands: Harmonics)
Better than –50 dB
(160 - 10m Amateur bands: Others)
Better than –65 dB (6m Amateur band)

Table of Contents

Related product manuals