Vertex Standard Pilot VXA-210 User Manual

VXA-210 PILOT OPERATING MANUAL
13
To set 118.275 MHz, you do not need to press
the final “5” in the frequency:
[
1
]
à
[
1
]
à
[
8
]
à
[
2
]
à
[
7
]
.
r You may also turn
the top panel’s DIAL
selector knob to
choose the desired
operating frequency.
The channel fre-
quency will appear
on the LCD.
r To change fre-
quency in 1 MHz
steps, press the
[
F
]
key momentarily,
then rotate the DIAL
selector knob to se-
lect the MHz digit
desired. Press
[
F
]
once more to resume normal
channel selection in 25-kHz steps.
OPERATION
r Rotate the VOL-
UME knob to set the
volume level. If no
signal is present,
press and hold the
MONITOR button
for 2 seconds; back-
ground noise will
now be heard, and
you may use this
noise to set the
VOLUME knob for
the desired audio
level. Press the
MONITOR button momentarily to silence the
noise and resume normal (quiet) monitoring.
r Press and hold the
LAMP button for 2
seconds, to illumi-
nate the display con-
tinuously. To disable
the illumination,
press the LAMP but-
ton momentarily.
F
+

Vertex Standard Pilot VXA-210 Specifications

General

Brand	Vertex Standard
Model	Pilot VXA-210
Category	Transceiver
Language	English