Vertex Standard Pilot VXA-210 User Manual

VXA-210 PILOT OPERATING MANUAL
19
OPERATION
Temperature Display
The VXA-210 can measure the current temperature.
r To display the cur-
rent temperature,
press
[
F
]
à
[
6
(
SENSR
)]. The dis-
play will now indi-
cate the
current tem-
perature.
r Pressing the
[ ( )] key to switch the
temperatue unit between “Celsius: °C” and
“Fahrenheit: °F.”
LOCK Function
The lock function prevents accidental changes to the
frequency setting and the keypad controls.
r To activate the lock
feature, press
[
F
]
à
[ ( )]
.
r In the LOCK mode,
the display will show
“
-
LOCK
-
” when you
rotate the DIAL se-
lector knob, press the DIAL selector knob, or
touch a key on the keypad.
r To turn the lock feature off,
press
[
F
]
à
[ ( )]
again.
r You can still access the 121.500 MHz Emergency
Frequency when the LOCK function is on.
Simply press the
[
121.5
]
key momentarily (this
key never locks). Pressing this key also unlocks
the radio.
r Press the PTT switch to return to the normal op-
eration.
If the temperature display is incorrectly, it can be re-
calibrated. See page 22 for details.
3
6
9
2
5
8
0
F
3
6
9
2
5
8
0
F
ó

Vertex Standard Pilot VXA-210 Specifications

General

Brand	Vertex Standard
Model	Pilot VXA-210
Category	Transceiver
Language	English