EXS
100 User Manual 10H52260UM60 - Rev. 1 - 10/2017
Chapter 10 Specifications
This section lists the UPS specifications.
10.1 Conformity and standards
The UPS has been designed to comply with the European and international standards listed in Table 10-1.
Table 10-1 European and international standards
Item Reference Standards
General safety requirements for UPS IEC/EN62040-1+A1:2013/AS62040-1
EMC requirements for UPS IEC/EN62040-2:2006/AS62040-2
Method of specifying the performance and test requirements of UPS IEC/EN62040-3/AS62040-3 (VFI SS 111)
The product standards in this table incorporate relevant compliance clauses with generic IEC and EN standards for safety
(IEC/EN/AS60950), electromagnetic emission and immunity (IEC/EN/AS61000 series) and construction (IEC/EN/AS60146 series
and 60529).
10.2 Environmental Characteristics
Table 10-2 Environmental characteristics
Item Unit
Rated power (kVA)
10kVA-20kVA
Noise at 1m (measured frontally) dB (A) 58
Altitude m ≤ 3000
Relative humidity %RH 0 - 95%, non condensing
Operating temperature °C
0 - 40°C (Note: Battery life is halved for every increase of 10°C above
20°C)
UPS storage temperature °C -25°C - +55°C
UPS shipping temperature °C -40°C - +70°C
10.3 Mechanical Specifications
Table 10-3 Mechanical specifications
Item Unit
Rated power (10kVA-20kVA)
Standard UPS
(without
internal
batteries)
Standard UPS
(with internal
batteries 2x32Ah)
UPS with side
cabinet
(without
internal
batteries)
UPS with side
cabinet
(with internal
batteries 4x32Ah)
Dimensions (W × D × H) mm 335x65x1300 335x65x1300 576x650x1300 576x650x1300
Net weight mm 85 250 145 470
Gross weight kg 95 260 155 480
Colour kg RAL7021 RAL7021 RAL7021 RAL7021
Protection rating, IEC (60529) kg IP20 IP20 IP20 IP20
To Next Page
Loading...
