Vertiv Geist GU2 Series User Manual

Figure 3.3 Local Area Connection Properties
4. Select Internet Protocol Version 4 (TCP/IPv4) from the list, then click Properties.
NOTE: If you see more than one TCP/IP entry, as in the example above, the computer may be
configured for IPv6 support as well as IPv4; make sure to select the entry for the IPv4 protocol. Write
down the current NIC card settings so you can restore them to normal after you have completed the
setup procedure.
Vertiv | Intelligent Rack PDU Installer/User Guide
22

Vertiv Geist GU2 Series Specifications

General

Brand	Vertiv
Model	Geist GU2 Series
Category	Power distribution unit
Language	English