MODEL
EDGELI-
1500IRT2U
EDGELI-2200IRT2U EDGELI-3000IRT2U
Power Rating @ 230V
1500VA / 1350W /
6.7 A
2200VA / 1980W / 9.8A 3000VA / 2700W /13.3A
Output
Output Voltages (on battery) 200 / 208 / 220 / 230 / 240 VAC (230 VAC is factory default)
Output Frequency (on battery) Autodetect 50/60 Hz ±1%
Output Receptacles - not
controllable
(3) IEC 320 C13
(3) IEC 320 C13
(1) IEC 320 C19
Output Receptacles - controllable (3) IEC 320 C13
Transfer Time Adjustable with Input Waveform Sensitivity setting. See Settings Submenu for details.
Output Waveform (on Battery) Pure Sinewave
Output Overload Operation
101% - alarm warning
111% - alarm warning and shutdown after 10 seconds
121% - alarm warning and immediate shutdown
Protection Electronic (over current, short circuit w/ latching shutdown)
AC-mode Efficiency 97.5% or greater for 200/208/220/230/240 VAC
Buck- Boost1- and Boost2- mode 95% or greater for 200/208/220/230/240 VAC
Recharge Time
1.7 hours to
recover 90%
1.7 hours to recover 90% 2.4 hours to recover 90%
Internal Battery
Part Number
PSI5-
1500LIBATKIT
PSI5-2200LIBATKIT PSI5-3000LIBATKIT
Protection Electronic (overcurrent, short circuit with latching shutdown)
Type LIFePO4 Battery in compliance with IEC62619, UL1973, and UL1642
Quantity (Total Wh) 1 (240Wh) 2 (384Wh) 3 (576Wh)
Environment
Operating temperature 0 °C to 40 °C
Storage temperature - 20 °C to +50 °C without battery inside
Relative Humidity (Operation) 8% to 90%, non-condensing
Operating Altitude 3000 m @ 0°C to 40 °C without derating
Audible Noise
<45 dBA AVR mode, >70% load
<55 dBA Battery mode
Agency
Table 6.4 Specifications, EDGELI-1500IRT2U, EDGELI-2200IRT2U, EDGELI-3000IRT2U (continued)
6 Specifications
52
Liebert® EDGE Installer/User Guide
To Next Page
Loading...
