iPM 200 generator module
® Vetaphone March 2021 3401201GB
Communication error to
external unit 1 to unit 9.
There are no responds
from the external unit (No.)
Verify that the external unit are connected.
If the error persists, contact the support department
There is no response from the profibus master. Check the
connection on the profibus.
Modbus Communication
Error
Communication error on the MODBus.
The generator has lost contact with the modbus master during
discharge. This can occur if the generator is in a noisy
environment. If the generator or the cable is too close to the
discharge this could cause this error.