VIA694X System Board 53
PNP OS Installed
:No(default)
OS will not recognize PnP devices.
:Yes
OS will arrange the setup of PnP devices.
Reset Configuration Data
:Disabled(default)
:Enabled --- to reset “Extended System Configuration Data(ESCD) when you
exit setup if you have installed a new add-on card and the system reconfiguration
has caused such a serious conflict that the operating system can not boot up.
Resources Controlled By
:Manual
The table will show the below items: “IRQ Resources, DMA Resources.” The
user can adjust the shown items as required.
:Auto(ESCD) (default)
The table will not show the above items, and the system will automatically assign
the above setup.
PCI/VGA Palette Snoop
:Enabled
:Disabled (default)
Assign IRQ For VGA
:Enabled (default)
:Disabled
Assign IRQ For USB
:Enabled (default)
:Disabled
To Next Page
Loading...
