Maintenance
132
CT model
The oil is changed as follows:
Dismantle the guard.
Use a suitable tool to remove the oilplug.
Let the oil flow into an appropriate container.
Allow the last of the oil to drip out of the transmission for approx.
10 - 15 minutes.
Fit the oilplug and tighten it.
Remove the dipstick.
Pour the new oil through the hole where the dipstick is fitted.
Fit the dipstick on the gear and remove the dipstick again.
Check that the oil level is up to the “max” indication on the dipstick.
Repeat the procedure until the correct oil level is reached.
The oil level on the main gear must always be between “min.” and
“max.” as shown on the dipstick.
»Lubricants« page 170
To Next Page
Loading...
