Operation
66
Working in the field
Check the surrounding area before taking machine into use
Before driving and using the machine the surrounding area should be
checked.
This prevents persons and animals in the vicinity from being harmed.
If the surrounding area is not checked, it may result in serious injuries
to persons or animals.
Keep away from the machine
No unauthorised persons should be close to the machine during
operation.
This will ensure that no dangerous situations can arise.
Persons close to the machine during operation are at risk of being
severely injured.
Do not remove the protection guards
Check that all protective guards are in place before use.
This assures that the machine will offer maximum protection to the
operator.
If the safety guards are removed or not used it may result in serious
injuries and accidents.
The side guard for the cutting unit must be correctly positioned
before start up
The side guard for the cutting unit must be folded out and correctly
positioned before the machine is started.
This ensures that the machine will give maximum protection to the
operator.
Moving objects may cause serious injuries and accidents.
T model
The T model is operated in the following way:
Check that all guards on the machine are folded out and correctly
positioned.
To Next Page
Loading...
