Operation
67
Check that the hydraulic mechanical safety valve is open.
Connect the tractor's PTO outlet.
Carefully increase the speed on the P.T.O. shaft to 540/1000 RPM.
»Number of revolutions on the PTO« page 30
Activate the tractor hydraulics and turn the machine's drawbar to
the right side of the tractor.
Activate the tractor hydraulics and lower the cutting unit of the
machine to its working position.
Activate the tractor hydraulics until the hydraulic cylinders on the
cutting unit are fully extended to their maximum length.
Find a suitable driving speed for the tractor and cut the 1st swath.
Activate the tractor hydraulics and raise the cutting unit when
turning at the headland.
To Next Page
Loading...
