Videojet 6210 Operator Manual
Rev AB Starting the Printer 3-5
5 Select 0 or 180 degrees depending on your requirement and touch
ok. The screen orientation changes.
6 Touch the Home button to return to the home page.
Starting the Printer
When the printer is switched on, the printer state changes from the
SHUTDOWN to the STARTING UP and then to the OFFLINE state.
Under this condition, all the external electrical inputs are ignored and
the print sensor signals will not trigger a print. This enables you to
check if the line and the printer are ready for production, before you
switch the printer into the RUNNING state to start printing.
To switch the printer to the RUNNING state, touch the Start button
(Figure 3-6).
Start Button
Figure 3-6: Buttons
Stop Button
To Next Page
Loading...