66250754-EN - V1.0 - 18/02/19
- 38 -
4000 Series GSM Audio Intercom - Technical Manual
4000 Series GSM Audio Intercom with Proximity
Programming the GSM Intercom
Store master telephone no. STM 1111STM”07771234567” n/a n/a 46
Latch the relay RLA 1111RLA n/a n/a 46
Unlatch the relay RUL 1111RUL n/a n/a 46
Latch the auxiliary AO1 output A1L 1111A1L n/a n/a 46
Unlatch the auxiliary AO1 output A1U 1111A1U n/a n/a 46
Latch the auxiliary AO2 output A2L 1111A2L n/a n/a 46 - 47
Unlatch the auxiliary AO2 output A2U 1111A2U n/a n/a 47
Store timeband for call buttons
to be active for
TBA 1111TBA”HHMMHHMM”,days HHMMHHMM
days = Mo, Tu, We,
Th, Fr, Sa, Su, AD,
WD and WE
00002359
AD (all days)
47
Store timeband(s) for access
control: proximity, access codes
and dial to open numbers to be
active for
ATB 1111ATBn”HHMMHHMM”,days n = 0 - 9
HHMMHHMM
days = Mo, Tu, We,
Th, Fr, Sa, Su, AD,
WD and WE
n/a 47 - 48
Store access levels for access
control: proximity, access codes
and dial to open numbers to be
active for
ACC 1111ACCn”tttttttttt”,”rrrrrrrr” n = 0 - 9
each t = 1 or 0
each r = 1 or 0
n/a 49
Using access levels with dial to
open numbers (DTO)
STR 1111STR”n1”An,”n2”An,”n3”An,”n4
”An,”n5”An
An = A0 - A9
n1 = 1st DTO
n2 = 2nd DTO
n3 = 3rd DTO
n4 = 4th DTO
n5 = 5th DTO
n/a 50
Check/Set date & time CLK 1111CLK”yy/mm/dd,hh:mm”? yy/mm/dd,hh:mm n/a 50
Input status check and set CHK 1111CHK? n/a n/a 50 - 51
Silent dialling mode AUE 1111AUEnn nn = 00 or 01 01 51
Send tone after answer (But 1) DTP 1111DTPn n = 0 - 9 or X X 51
Send tone after answer (Div 1) DTD 1111DTDn n = 0 - 9 or X X 51
Send DTMF tone delay DTT 1111DTTnn nn = 01 - 12 03 51
Enable dial 0 on answer function EDZ 1111EDZnn? nn = 00 or 01 00 51 - 52
Enable # (hash) function ED# 1111ED#nn? nn = 00 or 01 00 52
Enable proximity EPR 1111EPRnn? nn = 00 or 01 00 52
Proximity number of bytes to
check
PBY 1111PBYnn? nn = 02, 03 or 04 02 52 - 53
Store a fob/card in a known
location or the next available
location
FOB 1111FOBnnn”site”,”user”
or
1111FOB”site”,”user”
nnn = 000 - 999 or
nnn - optional
n/a 53
Store a fob/card in a known
location or the next available
location with an access level
FOB 1111FOBnnn”site”,”user”An
or
1111FOB”site”,”user”An
nnn = 000 - 999 or
nnn - optional
An = A0 - A9
An default = all
access unless
specied
53 - 54
Find a fob or card number FDF 1111FDF”user code” n/a n/a 54
Delete a fob or card without
knowing its location
DEF 1111DEF”12345” n/a n/a 54
Store an access code in a known
location or the next available
location and activate relays 1
and/or 2 respectively
PIN 1111PINnnn”code”12
or
1111PIN”code”12
nnn = 000 - 399 or
nnn - optional
code = 4 - 8 digit
access code
1, 2 = relay to
activate
relay setup
default = relay 1
unless specied
54 - 55