To Next Page

To Previous Page

PAGE 11 of 36 VR GSM DOOR INTERCOM TECHNICAL MANUAL VER2.0.0

ART.4800 CODELOCK REPROGRAMMING GUIDE

Enter the

engineer’s

code

Press Enter

RED Light will

illuminate *

Notes:

* If the red light does not illuminate, the engineers code is incorrect. Follow the factory default procedure below.

** On the first loop of the flow chart its relay 1, second loop is relay 2.

FACTORY DEFAULT PROCEDURE

Step 1 Remove the power from the keypad

Step 2 Press and hold the enter button while re-powering the keypad

Step 3 Release the enter button. The factory engineer’s code is restored to 111111 (6 x 1)

Re-Enter the

engineer’s

code

Alternatively enter a

new engineer’s

code (4-8 digits)

Press Enter

Enter relay

code

Relay code (4 – 8

digits) operates the

door or gate. **

Press Enter

Enter relay

time

Press Enter

Two digits (01 – 99 Sec

or 00 for remain open)

doors?

Press Enter

twice to exit

programming

RED Light will

switch off

Repeat steps

for relay 2 &

relay 3

YES

Engineers code

Relay 1 code

Relay 2 code

Relay 3 code

Relay 1 Time

Relay 2 Time

Relay 3 Time

Brand	Videx
Model	Door Intercom System
Category	Intercom System
Language	English

Videx Door Intercom System User Manual

Table of Contents

Questions and Answers:

Videx Door Intercom System Specifications

Related product manuals