Viessmann Vitopend 100-W User Manual

34
Check Display Symbols
Flashing Constant
Current outside temperature (for op-
eration with outside temperature sen-
sor)
"IF10" °C
Current room temperature (for opera-
tion with room temperature sensor)
"IF10" °C
Set heating curve (for operation with
outside temperature sensor)
"IF11"
Set room temperature (for operation
with room temperature sensor)
"IF11"
°C
Burner status "IF12"
Current modulating current with
Vitopend, fan speed with Vitodens
"IF13"
Current burner output "IF14" %
--- "IF15"
Gas solenoid valve position ("On" or
"OFF")
"IF16"
Fan status ("On" or "OFF") "IF17"
Circulation pump status ("On" or
"OFF")
"IF18"
3-way diverter valve position (DHW,
heating mode or central position)
"IF19"
Correction factor for flue system
length
"IF20"
Type of DHW cylinder "IF21"
OpenTherm (= On/Off) "IF22"
Checks
Checking information
(cont.)
5837147

Viessmann Vitopend 100-W Specifications

General

Fuel Type	Gas
Max. Water Temperature	85 °C
Type	Condensing Boiler
Gas Type	Natural gas / LPG
Efficiency	Up to 98%