To Next Page

To Previous Page

Further information can be found

in chapter "Terminology" in the

Appendix.

DHW temperature adjustment

Press the following buttons:

1. MODE repeatedly, until the DHW

temperature appears on the

main display together with

symbols and , and

symbol is flashing.

°C

2. / for the selected value

Setting range: 30 to 57 °C

(30 to 60 °C for operation

with DHW cylinder)

3. OK to confirm

Note

If you set a temperature value that is

below 30 °C for the DHW temperature,

"OFF" appears and DHW heating is

deactivated.

Operating program

Further information can be found

in chapter "Terminology" in the

Appendix.

Setting the operating program for DHW heating

You do not want to heat your rooms but

would like to have DHW available.

Press the following buttons:

1. MODE repeatedly, until "SEt"

appears on the main dis-

play along with a flashing

symbol for summer mode.

2. OK to confirm

DHW heating

DHW temperature

5837147

Viessmann Vitopend 100-W User Manual

Other manuals for Viessmann Vitopend 100-W