29
3. If there is no demand for central
heating or DHW heating and no time
program is active, only symbol ,
the DHW temperature (e.g. 50 °C)
and the current time are displayed.
If there is a current demand or a
time program is active, you may also
see additional symbols.
Time program
Further information can be found
in chapter "Terminology" in the
Appendix.
Switching the time program on/off
Press the following buttons:
1. MODE repeatedly, until "SEt"
appears on the main dis-
play, together with flashing
symbols , p and .
2. / until "On" or "OFF"
appears on the additional
display.
3. OK to confirm
Note
"On" Time program is switched on.
"OFF" Time program is switched off.
DHW heating
Operating program
(cont.)
5837147
To Next Page
Loading...
Need help?
General
