20
Setting the operating program for central heating and DHW
heating
You want to heat your rooms and you
want to have DHW available.
Press the following buttons:
1. MODE repeatedly, until "SEt"
appears on the main dis-
play, together with a flash-
ing symbol for winter
mode.
2. OK to confirm
3. If there is no demand for central
heating or DHW heating and no time
program is active, only symbol ,
the heating water temperature
(for example 60 °C) and the current
time are displayed.
If there is a current demand or a
time program is active, you may also
see additional symbols.
Time program
Further information can be found
in chapter "Terminology" in the
Appendix.
Central heating
Operating program
(cont.)
5837147
To Next Page
Loading...
