Illustration with the Vitoladens 300-C
A
Ventilation air
B
Flue gas
C
Inspection port
D
Connection piece
Rated heating output (kW) up to
35.4
from
42.8
System size
Ø mm
1
Boiler flue connection
For balanced flue operation and coaxial
balanced flue routing
(Part of the standard boiler delivery)
80/125 100/150
Balanced flue pipe
With test ports (160 mm long)
80/125 100/150
2
Standard shaft pack (PPs, flexible)
Comprising:
– Support bend
– Support rail
– Shaft cover (PPs)
– Spacers (5 pce, max. clearance 2 m)
or
80 100
Rated heating output (kW) up to
35.4
from
42.8
System size
Ø mm
Standard shaft pack (metal/PPs, flexi-
ble)
For twin flue chimneys; one flue for solid
fuel boilers.
Comprising:
– Support bend
– Support rail
– Shaft cover (metal)
– Terminal pipe (stainless steel)
– Spacers (5 pce, max. clearance 2 m)
80 100
Spacers (5 pce, max. clearance 2 m) 80 100
3
Flue pipe, flexible, as a roll
12.5 or 25 m
80 100
4
Connection piece
For connecting residual lengths of the flex-
ible flue pipe
80 100
Pipe lowering attachment with 25 m
rope
80 100
5
Inspection piece, straight (1 pce)
For installation into the flexible flue pipe
80 100
6
Balanced flue inspection piece, straight
(1 pce)
80/125 100/150
7
Wall bezel 125 150
8
Balanced flue pipe
1 m long
0.5 m long
80/125 100/150
9
Balanced flue bend
87º (1 pce)
45º (2 pce)
or
80/125 100/150
Balanced flue inspection bend 87º
(1 pce)
80/125 —
Balanced flue inspection tee 87º
(1 pce)
— 100/150
qP
Balanced flue slide coupling 80/125 100/150
Fixing clamp, white (1 pce) 80/125 100/150
Stainless steel extension, 380 mm long
for shaft cover, metal/PPs, flexible
80 100
Note
Install the flexible flue with a maximum offset of 45° from the vertical.
Design and sizing information for the Vitoladens 300-C, -T, and Vitorondens 200-T, 222-F
(cont.)
14
VIESMANN
VITOLADENS, VITORONDENS
2
5822 452 GB
To Next Page
Loading...
