44
8.3 Other Problems
Problems Solutions
No power Touch the LED power light for at least 1-2 seconds, if the LED
does not light blue with the device booting-up then:
-
Ensure that the power adaptor is plugged-in to a suitable
power socket
-
Ensure that the DC connector is fully inserted into the correct
socket on the rear of the VSD241 located under the cover
-
Check the power socket with another device (i.e. table lamp)
-
If there is still no power then contact ViewSonic support or
the Reseller from whom the device was purchased
No display Check external HDMI device and connections.
Lock-up Restart by touching LED power light.
App doesn't
function
Check with App author.
No network Check WiFi settings, try Ethernet if available.
No audio Check volume level setting.
To Next Page
Loading...
