9
Section B – Cabinet
Trash Bucket
REMOVE
To remove the bucket completely from the cabinet for
repairs or cleaning, follow these instructions.
1.
2.
3.
BUCKET SLIDE
RELEASE TAB
SCREW
1. Pull out trash bucket until it stops.
2. Remove one screw from each of the bucket slides.
3. Press down on left and right bucket slide release tabs
while pulling the bucket out of the cabinet.
Door Strap
REMOVE AND REPLACE
Should either door strap become damaged, replace with
a new one.
TRASH
BUCKET
DOOR
BUTTON
SPACER DOOR
STRAP
BOLT
1. Remove the bolt and spacer that attach the door strap to
the side of the trash bucket door.
2. Remove the strap by sliding the keyhole area of the
slotted hole over the button.
3. Install the replacement door strap on the button and
align the bolt hole with the hole in the trash bucket
door.
4. Hold the spacer in position between the trash bucket
and the strap. Secure with the bolt.
To Next Page
Loading...
