To Next PageTo Next Page
Need help?Do you have a question about the vimec S11 and is the answer not in the manual?
General| Rated speed | 0.15 m/s |
|---|---|
| Suitable for | Straight staircases |
| Drive system | Rack and pinion |
| Power supply | 230V AC |
| Safety devices | emergency stop |
| Control System | remote control |
Details about the lift's identity and maker.
Information regarding service and support after purchase.
Overview of the lift's components and design.
Specifies authorized and forbidden ways to use the platform lift.
Provides key specifications like speed, load, and electrical requirements.
Steps required before the lift can be used.
Instructions for safe and proper operation of the lift.
Important considerations for safe operation.
Procedure for safely rescuing a passenger during an incident.
Details the various safety features and mechanisms of the lift.
Additional safety features not covered in the main safety systems.
Guidelines and schedule for regular maintenance.
Procedure for inspecting and replacing the lift's nuts.
Common problems and their solutions for the lift.
Reference to diagrams for electrical system connections.
Information on noise and vibration characteristics of the lift.
Instructions for environmentally sound disposal of lift components.
Lists the components included in the lift delivery.
Guidance on selecting suitable locations for lift installation.
Procedures for safely moving the lift components.
Step-by-step guide for assembling and installing the lift.
Instructions for fixing the lift column to the wall.
Details for installing the column on a metal scaffold structure.
Steps for assembling and mounting a disassembled column.
Installation procedure for the mechanical stop safety device.
Procedure for attaching the lift platform.
Steps for installing the guards onto the platform.
Steps for installing the lift gate.
Installation of the landing guard at a 90-degree angle.
Procedure for installing the lift slide mechanism.
Steps for fixing the push-button control panel.
Instructions for installing the gate at the first floor.
Connects electrical components during installation.
Procedure for attaching the front casing parts.
Installation of the cam mechanism for the slide.
Steps for installing a fixed ramp.
Procedure for installing the handlebar.
Installation of the photocell safety sensors.
Procedures for verifying the lift's functionality after installation.
Checks and adjustments needed for optimal operation.
List and diagrams of parts for the lift column.
Exploded view and list of casing components.
Identification of nuts and related components.
Parts list for lift rails and associated accessories.
Parts for the control panel located on the lift platform.
Parts for the control panel located at floor level.
Parts related to the lift's locking mechanism.
Components of the lift's bellows.
Parts list for the lift platform.
Components of the lift's electrical system.
Parts for the guard board on the platform.
Components for the guard on the opposite side of the column.
Parts for the guards on the side of the rail.
Components of the standard lift gate.
Parts for the motorized gate.
Components of the lift gate assembly.
Parts for the remote call column.
Parts for the lift's handlebar.
Components for the lubrication system.
Parts for the photocell safety system.
