19
b
a
b
b
c
a
d
d
c
d
e
FIG.1
FIG.2
1) SYSTEM SUPPLY CONDITION
The stairlift is supplied subdivided into the following
components:
Lift structure (Fig. 1/a)
Complete with gear motor, drive components with safety
gear and electrical system.
Batteries (Fig.1/e).
Carrier platform (Fig. 1/b)
Complete with guard boards and bottom safe edge
controlled by safety microswitches.
Bar assembly (Fig. 1/c).
Fixed or retractable (optional) protective bars.
WARNING: Remove the bar assemblies (Fig. 1/c)
before tting the carriages onto the rails.
Casings and on-board control panel (Fig. 1/d).
WARNING: Remove the upper and lower casings
(Fig. 1/d) before tting the carriages onto the rails.
Rail assembly (Fig. 2)
Comprising:
- Lower rail complete with power bus bar for special
applications and supporting feet (Fig. 2/a).
- Upper rail (Fig. 2/b).
- Mounting accessories.