11
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Pressure Tank Assembly (Part No. 3702-42)
Item Name Qty Material
1 Pad 3 Mild steel to BS970 non-lead bearing
2 Packing strip 6 Mild steel to BS970 non-lead bearing
3 Leg mounting (RH) 3 Mild steel to BS970 non-lead bearing
4 Leg mounting (LH) 3 Mild steel to BS970 non-lead bearing
5 Mounting block 1 Mild steel to BS970 non-lead bearing
6 Nameplate 1 22 SWG Aluminium sheet
7 Hammerdrive screw 2 Type U hardened, 00 x 1/8 in.
8 Outer shell 1 20 in. OD x 1/4 in. thick mild steel plate to
BS1501-151 GR403A *
9 Tube 1 2 3/8 in. OD x 3/16 in. wall steel tube to
BS1501-HFS S360 *
10 End plate (lower) 1 19 7/16 in. x 1/2 in. thick mild steel plate to
BS1501-151 GR403A *
11 Pad 1 Mild steel to BS970 non-lead bearing
12 Anchor plate 2 Mild steel to BS970 non-lead bearing
13 Pad 1 Mild steel to BS970 non-lead bearing
14 Inner shell 1 10 3/4 in. OD x 1/4 in. wall steel tube to
BS1501-HFS S360 *
15 End plate (upper) 1 19 7/16 in. x 1/2 in. thick mild steel plate to
BS1501-151 GR403A *
16 Flange 1 Mild steel to BS970 non-lead bearing
17 Relief valve mounting insert 1 Mild steel to BS970 non-lead bearing
18 Welding wire A/R 1.0 mm mild steel BS2901 Part 1:1983A18 *
*Material fully certified and covered by mechanical and chemical certificates
To Next Page
Loading...
