24
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Section 3
Tools and Materials
Special tools
1 The following special tools are required for certain procedures detailed in Sections 4 and 5
Consumable materials
2 The following consumable materials are required for certain procedures detailed in Sections 4 and 5.
Item Part No. Use
Charging valve assembly 3702-32 Nitrogen charging
Item Part No. Use
Oil, Nycolube 11B Z150-031 Bearing and general lubrication
Grease, GP50 Z150-081 Crab/steer changeover mechanism
Grease, Chesterton Z150-105 Ram lubrication
Loctite 221 Z002-026 Steering change-over gear
Loctite 542 Z002-025 Pressure gauge assembly
Loctite Primer T Z002-019 Primer for 542
Lubricant, chain Z150-050 Steering chains
Soap solution -- Leak testing
To Next Page
Loading...
