23
Contents
Previous
Page
First
Page
Next
Page
Previous
View
14 The friction control (5) is located on the fixed part of the column assembly. Friction, or drag, may be
applied to the movement of the column to suit the requirements of the operator. Adjustment is by turning the
friction control knob, clockwise to increase friction, counter-clockwise to decrease friction.
Cable guard
15 A drop-down cable guard (10) is fitted to the pedestal base. The guard may be adjusted by slackening
the six retaining thumbscrews (11), positioning the guard at the required height and then re-tightening the
thumbscrews. The guard should be set as close as possible to the studio floor.
To Next Page
Loading...
