Vinten 3702 - Page 52

52
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.3 Fulmar Pedestal - Centre Tube
Item Part No. Nomenclature Qty
3702-36 Bearing assembly (adjusting), comprising: 2
1 3702-391 Bracket roller, adjusting 1
2 3176-223 bearing spindle 1
3 3176-228 Shim 1
4 P203-006 Bearing, needle roller, radial, with angular contact ball bearing,
15 mm ID x 28 mm OD x 20 mm long
1
5 3176-222 Adjuster, eccentric 1
6 L075-804 Screw, grub, half dog point, socket head, 10-32UNF x 1/4 in. long 2
7 3702-356 Plug, roller bracket 8
8 L076-002 Screw, skt csk hd, 1/4 in. UNF x 1/2 in. lg 32
9 M005-903 Screw, skt csk hd, M4 x 12 mm lg 2
10 M600-001 Washer, GN 184-16 2
11 P200-201 Bearing, 6001-22 4
12 M701-039 Snap ring, M2300-0280 2
13 M602-003 Shim P12-18-0.3 8
14 3702-456 Sprocket, lifting 2
15 J202-014 Roller chain, 3/8 in. pitch, 83 pitches (Fig 6.7) 2
16 3702-264 Cover, centre tube 1
17 L073-407 Screw, fillister hd, 6-32 in. UNF x 1/4 in. lg 4
3702-37 Bearing assembly (adjusting), comprising: 2
6 L075-804 Grub screw, skt hd, 10-32 in. UNF x 1/4 in. lg 2
18 3702-231 Adjuster, eccentric 1
19 N500-021 Bearing, needle roller, NK12/20 1
20 3702-372 Washer, eccentric bearing 1
21 3702-206 Bracket roller, adjusting 1
22 3702-229 Pin. adjustable 1
23 L073-011 Screw, csk hd, 6-32 in. UNF x 3/8 in. lg 8
24 3702-455 Stub shaft, sprocket 2
25 L072-005 Screw, csk, 4-40 in. UNC x 3/4 in. lg 8
26 3702-234 Track clamp, top 4
27 3702-257 Track, centre tube 4
28 3702-247 Stop, centre tube 2