Vinten 3702 - Page 61

61
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.6 Fulmar Pedestal - Tank
Item Part No. Nomenclature Qty
1 3702-42 Pressure tank 1
2 Q200-011* Bonded seal, Dowty PP-45-B 1
3 3702-46 Safety valve assembly 1
4 3702-255 Manifold 1
5 3702-14 Ram assembly (Fig 6.7) 1
6 Q900H006* ‘O’ ring, 3/4 in. ID x 3/32 in. sect 1
7 L075-918 Screw, skt cap hd, 10-32 in. UNF x 5/8 in. lg 3
8 Q001-030* ‘O’ ring, 7/8 in. OD x 3/32 in. sect 1
9 M600-007 Washer, M6 8
10 L076-922 Screw, skt cap hd, 1/4 in. UNF x 5/8 in. lg 8
11 J003-038 Plug, 1/8 in. BSP 1
12 Q200-008* Bonded seal, Dowty PP-45-A 1
13 Q001-014* ‘O’ ring, 3/4 in. ID x 0.07 in. sect 1
14 3702-457 Filter 1
15 3702-27
3702-28
3702-29
Wheel housing assembly (steering) (Fig 6.10)
Wheel housing assembly (adjustable sprocket) (Fig 6.11)
Wheel housing assembly (fixed sprocket) (Fig 6.12)
1
1
1
16 L078-908 Screw, skt cap hd, 3/8 in. UNF x 7/8 in. lg 18
17 L075-020 Screw, csk hd, 10-32 in. UNF x 3/4 in. lg 2
18 L800-077 Spirol pin, 3/16 in. dia x 1 in. lg 2
19 3702-357 Bottom cord clamp 2
20 3702-378 Bush 2
21 3702-904SP* 3-strand pre-stretched Terylene cord, 1/4 in. dia x 50 in. lg (Fig 6.3) 2
3702-33 Pressure gauge assembly, comprising: 1
2 Q200-011* Bonded seal, Dowty PP-45-B 2
22 3954-206 Banjo 1
23 Q200-004* Bonded seal, Dowty PP-45-3 1
24 3702-389 Schrader valve 1
25 3328-304 Pressure release button 1
26 3054-205 Banjo clamp 1
27 M005-505 Screw, skt butt hd, M4 x 12 mm lg 4
28 3954-202 Banjo bolt 1