Vinten 3702 - Page 73

73
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.10 Fulmar Pedestal - Wheel Housing Assembly (Steering)
Item Part No. Nomenclature Qty
1 3702-348 Steer label 1
2 3702-346 Pedal 2
3 Q900H007* ‘O’ ring, R4081, 1 1/16 in. OD x 13/16 in. ID 2
4 3702-345 Pedal shaft 2
5 L800-040 Spirol pin, 1/8 in. dia x 3/4 in. lg 3
6 L077-711 Bolt, hex hd, 5/16 in. UNF x 1 1/14 in. lg 1
7 3702-342 Flanged bearing 1
8 3702-341 Reverse gear 1
9 3702-338 Steering bearing bracket 1
10 L077-702 Bolt, hex hd, 5/16 in. UNF x 1 1/2 in. lg 1
11 L602-112 Washer, 5/16 in. UNF 2
12 L701-016 Circlip, external 1
13 3702-299 Adjusting sprocket, steering 1
14 N200-007 Bearing 2
15 3702-300 Shaft, eccentric 1
16 3702-294 Transfer shaft (Fig 6.9) 1
17 L073-011 Screw, csk hd, 6-32 in. UNF x 3/8 in. lg 4
18 3702-297 Bearing housing clamp 1
19 P206-001 Bearing, self-aligning 1
20 3702-296 Bearing housing, drive sprocket 1
21 3702-285 Clutch body 1
22 L701-007 Circlip, external 1
23 3419-111 Packing washer A/R
24 M701-028 Circlip, external 1
25 3702-416 Shim, 0.005 in. A/R
26 3702-417 Shim, 0.010 in. A/R
27 N200-400 Bearing 1
28 J202-061 Chain, link, (connecting), 3/8 in. pitch 2
29 J202-012 Roller chain, 3/8 in. pitch, 307 pitches (Fig 6.11) (Fig 6.12) 1
30 3702-42 Pressure tank (Fig 6.6) 1
31 3702-209 Wheel housing (steering) 1