Vinten 3702 - Page 76

76
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.11 Fulmar Pedestal - Wheel Housing Assembly (Adjustable Sprocket)
Item Part No. Nomenclature Qty
1 3702-302 Sprocket, adjustable 1
2 L077-712 Bolt, hex hd, 5/16 in. UNF x 1 in. lg 1
3 L602-112 Washer, 5/16 in. UNF 3
4 L800-040 Spirol pin, 1/8 in. dia x 3/4 in. lg 1
5 3702-305 Adjuster, sprocket 1
6 L701-012 External circlip 2
7 3702-351 Guide sprocket 1
8 N200-004 Bearing 2
9 3702-303 Stub shaft, sprocket 1
10 3702-42 Pressure tank (Fig 6.6) 1
11 L501-165 Nut, full, 5/16 in. UNF 1
12 L078-908 Screw, skt cap hd, 3/8 in. UNF x 7/8 in. lg 6
13 N200-007 Bearing 1
14 3556-2 Bearing housing 1
15 N200-202 Bearing 1
16 3702-375 Shaft, fixed wheel (Fig 6.13) 1
17 3702-212 Wheel housing 1
18 L021-904 Screw, skt cap hd, 1/4 in. BSF x 1/2 in. lg 6
19 L076-923 Screw, skt cap hd, 1/4 in. UNF x 1 in. lg 1
20 L601-108 Spring washer, 1/4 in. 1
21 3702-236 Clamp, sprocket 1
22 3702-235 Sprocket, fixed wheel 1
23 J202-061 Chain, link, (connecting), 3/8 in. pitch 2
24 J202-012 Roller chain, 3/8 in. pitch, 307 pitches (Fig 6.10) (Fig 6.12) 1
25 3702-304 Stub shaft 1
26 L007-921 Screw, skt cap hd, 5/16 in. UNF x 7/8 in. lg 1