Viofo A229 Pro - Dashcam Settings; Parking Mode Configuration Options

32 33
• Time-lapse Recording : Off / 1 / 2 / 3 / 5 / 10 fps.
Record video from frames captured at specific time
intervals to conserve memory and reduce the time it
takes to review video. The default is off.
• IR LED : Off / On / Auto.
"On" means IR lights are always on, so the video color is
black and white. "Auto" means the dash cam will decide
to turn on/off infrared lights with different light condition.
"Off" means the IR lights are all turned off.
• Parking Recording
Parking Mode:
There are 3 options under parking mode:
① Auto Event Detection
The camera will automatically record a video
sequence while a moving object is detected during
parking. It will stop recording without new movements.
② Time Lapse Recording
Time lapse records a video at low frames at 1 / 2 / 3 /
5 / 10 fps, it keeps recording continuously without
audio recorded.
③ Low Bitrate Recording
This mode uses low bitrate to record video and audio,
and uses small file sizes for continuous recording.
Note:
1. We recommend that you buy VIOFO HK4 ACC hardwire
kit cable for parking mode recording.
2. In case you park the car outside in hot summer, we
highly recommend time lapse recording mode. If the
temperature inside the car goes above 60°C, we advise
turning off the dashcam to avoid recording errors or even
irreversible damages.
Enter Parking Mode Timer:
Set the timer for entering parking mode. (Only for
hardwire cable, if you use external battery, this
function will not work.)
"Off" means the camera will enter parking mode right
away when the engine is off.
"90 Seconds" means the camera will enter parking
mode 90 seconds after the engine is off.
Parking G-sensor:
The G-sensor detects significant or sudden movement
(such as an impact or collision), it will trigger an event
recording. We suggest setting it to High Sensitivity in
parking mode recording.
Parking Motion Detection:
Adjusts the sensitivity of the motion detection so minor
motion caused by wind or rain doesn't trigger a
recording.
• Image Rotate & Mirror:
Turn on / off the Rear camera image rotate and mirror.
Turn on /off the Interior camera image rotate and mirror.
• Custom Text Stamp:
Imprint the customize text on the recorded video.
• License Plate Number:
Imprint the car number on the recorded video.
Parking Recording Timer:
"Off" means the camera will keep recording until the
hardwire kits cut the power supply.
"1 Hour" means the camera will shut down after it gets
into parking mode for 1 hour.