34 35
• Wi-Fi: Off / 2.4GHz / 5GHz.
Set it On / Off. Press the [ ] button for 3 or 5
seconds to enable Wi-Fi quickly. We recommend
choosing 5GHz Wi-Fi mode.
System Settings
• Live Video Source:
Front Camera / Interior Camera / Rear camera / Rear
Overlaid / Front Overlaid / All Cameras.
• Time Zone:
Set the current time zone for GPS time and date
calibration.
• Date/Time:
Set system date / time.
• Boot delay:
The camera will boot seconds delay when powered
on. The settings are Off / 5 Seconds / 10 Seconds.
• LED:
All Off / All On / Power LED Only.
You can enable / disable the LED lights.
Note:
the time zone must be manually adjusted for daylight
savings.
• Parking Mode LED:
All Off / All On / Power LED Only.
You can enable / disable the LED lights under Parking
Mode.
• Voice Notification:
Turn on / off the voice notification.
• Voice Notification Volume: Low / Medium / High
Adjust the volume of the voice notification.
• Beep Sound:
Off / Only Keytone / Only Boot Sound / All.
You can enable/disable the button and startup sounds.
• Voice Command:
Voice recognition commands. You can issue different
voice commands to remote control the camera, like:
Note:
Voice command language should be consistent with
dashcam system language in following four options:
English, Chinese, Russian, and Japanese. For all other
dashcam language systems, English is the only
language to trigger voice control function.
• Voice Control:
Turn off / on the voice control.
When Voice Control is turned on, you can control the
camera with spoken commands, using your voice to
take photos, turn on/off Wi-Fi, start recording, and more.
To Next Page
Loading...
