Chapter 1 Basics Manual VIPA System 300V
1-4 HB130E - CPU - Rev. 11/50
Components
The System 200V series consists of a number of PLC-CPUs. These are
programmed in STEP
7 from Siemens. Herefore you may use WinPLC7
from VIPA or the SIMATIC manager from Siemens.
CPUs with integrated Ethernet interfaces or additional serial interfaces
simplify the integration of the PLC into an existing network or the
connection of additional peripheral equipment.
The application program is saved in Flash or an additional plug-in memory
module.
Because of the automatic addressing, up to 32 peripheral modules can be
called by the System 300V CPUs.
In combination with a Profibus DP master and slave the PLC-CPUs or the
PC-CPU form the basis for a Profibus-DP network in accordance with DIN
19245-3.
The DP network can be configured with the hardware configurator from
Siemens. Together with the hardware configuration you transfer your
project into the CPU via MPI. Another component of the decentral system
is the CAN-Slave. It allows the link-up to the fieldbus system CANopen.
A large number of peripheral modules are available from VIPA, for example
digital as well as analog inputs/outputs.
These peripheral modules can be deployed central as well as decentral.
• Profile rail 530mm
• Peripheral modules with recessed labeling
• Dimensions of the basic enclosure:
1tier width: (WxHxD) in mm: 40x125x120
2tier width: (WxHxD) in mm: 80x125x120
3tier width: (WxHxD) in mm: 120x125x120
Please regard that the power supply and header modules like CPUs and
couplers may only plugged-in at the left side.
VIPA 321-1BH00
DI 16xDC24V
X2
34
.0
.1
.2
.3
.4
.5
.6
.7
.0
.1
.2
.3
.4
.5
.6
.7
SM321
Power Supply I/O PeripheryCPU
DC24V
ON
OFF
PS307/5A
VOLTAGE
SELECTOR
230
L+
M
L+
M
L+
M
L1
N
IN AC 120/230V
2.2/1.3A
50-60Hz
OUT DC 24V/5A
PWR
RUN
STOP
SF
FRCE
MMC
DESL
MMC
RUN
STOP
MRES
PLC
X1
VIPA 314-3SL01
X5
X2 X3
PS DVI CF PB-DP
CPU314NET
X2
34
DC 24V
+
-
+
-
MP I
2
Central system
Decentral system
Peripheral
modules
Dimensions/
Weight
Installation
To Next Page
Loading...
