Chapter 6 Deployment CPU 31x with TCP/IP Manual VIPA System 300V
6-34 HB130E - CPU - Rev. 11/50
Activate IPC
With system config, a dialog window for general settings for the system to
speed-up the performance opens.
Only the IPK-Part is supported by the CPU 31xNET
IPC
At the Intelligent Process Communikation IPC, also called spontanous
operation, data is send to the host for one time on CP request. Afterwards
only data that has been changed since the last transfer is transferred.
The IPC is used for communication between host and several CPs.
This acyclic transfer method is faster and causes significant less netload
than the cyclic transfer.
This allows the data aquisition of several hundred PLC systems via
TCP/IP.
IPC is only permissible with FETCH order types and is supported by other
visualization systems.
As default IPC is active.
Number IPC Lists Type the number of IPC orders.
Register Sys config
To Next Page
Loading...
