Viper 4806V Owner's Guide

6
© 2016 Directed. All rights reserved.
Using your System
Commanding the system
Commands, Basic or Advanced, are used to activate system features
and are performed by pressing one of the Command buttons. Basic
commands control the most often used keyless entry and remote start
features while Advanced commands control more specialized fea-
tures.
Confirmations for Basic or Advanced commands are indicated
by horn honks* and parking light flashes. A description of each fea-
ture confirmation is found in the following Basic command and Ad-
vanced command sections.
Performing Commands
Perform Basic commands by pressing a Command button.
Perform Advanced Commands by first accessing Levels 1-4 using the
AUX
button and then by pressing a Command button while within a
level.
Advanced command example: Silent Lock
1. Press the
AUX
button once to access Function Level 1.
2. Press the
AUX
AUX
button to perform the Silent Lock command.
3. The system will lock the doors and flash the parking lights,
without horn honks.*
* The optional Horn Honk feature must be connected

Viper 4806V Specifications

General

Remote Start	Yes
2-Way Communication	Yes
Number of Remotes	2
LCD Remote	Yes
Keyless Entry	Yes
SmartStart Compatible	Yes
Number of Buttons on Remotes	5
Remote Control	Yes
Door Lock Control	Yes
Trunk Release	Yes
Panic Mode	Yes
Valet Mode	Yes
Remote Start Ready	Yes
System Type	2-Way Security & Remote Start System
Alarm Notification	Yes
Shock Sensor	Yes
Starter Kill	Yes
Range	Up to 1 Mile