Viper 4806V Owner's Guide

17
© 2016 Directed. All rights reserved.
Remote Control Configuration
The remote controls have operations that can be configured to a user’s
personal preferences. The following instruction directs you through the
available configuration and programing options for the remote con-
trol.
Remote Programming
To Enter Programming: Press and hold the
AUX
button for eight sec-
onds, the transmit LED turns on to indicate the Main Menu is accessed.
To Exit Programming: Press and release the
AUX
button once then press
and hold the
AUX
button again until the transmit LED shuts off.
Remote Features
Enter programming to access the main menu as previously explained,
then from the Main Menu, press the
AUX
AUX
button to access the remote
operation features, two transmit LED flashes indicate the remote fea-
tures menu is accessed. Press the buttons indicated in the tables below
to set the feature option.
Responder LE
The Confirmation LED’s next to button indicate the feature setting.
Feature Button
Press
LED ON LED OFF LED flash LED
Double Flash
Keypad Lock
AUX
AUX
Auto OFF
No function
AUX
AUX
No
function
No
function
Car 2
AUX
AUX
Car 2 ON Car 2 OFF
Page
Mode*
AUX
Power
Save 1
Power Save 2

Viper 4806V Specifications

General

Remote Start	Yes
2-Way Communication	Yes
Number of Remotes	2
LCD Remote	Yes
Keyless Entry	Yes
SmartStart Compatible	Yes
Number of Buttons on Remotes	5
Remote Control	Yes
Door Lock Control	Yes
Trunk Release	Yes
Panic Mode	Yes
Valet Mode	Yes
Remote Start Ready	Yes
System Type	2-Way Security & Remote Start System
Alarm Notification	Yes
Shock Sensor	Yes
Starter Kill	Yes
Range	Up to 1 Mile