Viper 4806V Owner's Guide

10
© 2016 Directed. All rights reserved.
Advanced Commands: (Level 1)
Press and release the
AUX
button one time first, before pressing one of
the following command buttons.
Silent Lock
Press and release
AUX
AUX
The doors lock (if connected), without horn honks.* The Lock LED turns
on to confirm.
Silent Unlock
Press and release
AUX
AUX
Doors unlock (if connected), without horn honks. The parking lights
flash twice. The Unlock LED turns on to confirm.
Runtime Reset
Press and release
AUX
AUX
If more time is needed while remote start is active, runtime reset will
reset the runtime counter to the pre-programmed setting. The confirma-
tion LEDs show the runtime and the Remote Start ON tones play to
confirm runtime reset.
Note
Remote Start must be ON to use this feature.

Viper 4806V Specifications

General

Remote Start	Yes
2-Way Communication	Yes
Number of Remotes	2
LCD Remote	Yes
Keyless Entry	Yes
SmartStart Compatible	Yes
Number of Buttons on Remotes	5
Remote Control	Yes
Door Lock Control	Yes
Trunk Release	Yes
Panic Mode	Yes
Valet Mode	Yes
Remote Start Ready	Yes
System Type	2-Way Security & Remote Start System
Alarm Notification	Yes
Shock Sensor	Yes
Starter Kill	Yes
Range	Up to 1 Mile