Viper 4806V Owner's Guide

24
© 2016 Directed. All rights reserved.
Note
The temperature and battery thresholds can be changed by
an authorized Directed dealer if a higher or lower threshold
is desired.
Temperature Reporting
During Remote start the vehicle interior is checked regularly for temper-
ature changes. If a change in temperature is detected this report will
be sent to the remote for display. Each time the remote receives this
report it will beep and display the temperature as described for the
Temperature Request in the Advanced Commands section Level 1.
Note
Temperature report must be turned on by an authorized Di-
rected dealer.
Remote Start Time-out Alert
During remote start a message is sent three minutes before and again
at one minute before the engine turns off. The
AUX
LED, Remote Start
LED flash and several tones play as an alert to reset the runtime if
desired.
Pit Stop Mode
To exit vehicle with engine running
The system keeps the engine running during short trips into the house
or convenience store. To perform Pit Stop:
1. With the engine running, set the parking brake and release the
foot brake.
2. Press the
AUX
AUX
button, the parking lights will turn on to indicate
remote start is on.

Viper 4806V Specifications

General

Remote Start	Yes
2-Way Communication	Yes
Number of Remotes	2
LCD Remote	Yes
Keyless Entry	Yes
SmartStart Compatible	Yes
Number of Buttons on Remotes	5
Remote Control	Yes
Door Lock Control	Yes
Trunk Release	Yes
Panic Mode	Yes
Valet Mode	Yes
Remote Start Ready	Yes
System Type	2-Way Security & Remote Start System
Alarm Notification	Yes
Shock Sensor	Yes
Starter Kill	Yes
Range	Up to 1 Mile