Viper 4806V Owner's Guide

21
© 2016 Directed. All rights reserved.
Emergency Override
The override feature allows you to select a specific number of presses
needed to disable the system.
If the override button has been programmed to a new number of
presses by your authorized dealer, that number should be indicated
as follows. Number of presses_______
1. Turn the ignition On.
2. Press the control button on the Control Center the correct number
of times (the default is 1 press).
3. After a few seconds the horn output ceases and the system is
disabled.
Note
As a precaution, if programmed for Passive Locking or Auto
re-locking the system should be placed into Valet Mode until
a remote is available.

Viper 4806V Specifications

General

Remote Start	Yes
2-Way Communication	Yes
Number of Remotes	2
LCD Remote	Yes
Keyless Entry	Yes
SmartStart Compatible	Yes
Number of Buttons on Remotes	5
Remote Control	Yes
Door Lock Control	Yes
Trunk Release	Yes
Panic Mode	Yes
Valet Mode	Yes
Remote Start Ready	Yes
System Type	2-Way Security & Remote Start System
Alarm Notification	Yes
Shock Sensor	Yes
Starter Kill	Yes
Range	Up to 1 Mile