Vision VE-810 - Page 47

Chapter 4 - Optional Accessories 47
(Figure 4.4) Changing to Top Center Origin in Vision
Other clamps can be added to the versa vise to allow for the holding of irregular shaped
objects. Here are some figures that show different configurations.
(Figure 4.5) The Versa Vise with 9 inch jaws
These clamping bars are
specially designed to hold
both 1/16” and 1/8“ thick
materials and allow
engraving up to the edge of
the material without
nosecone interference.
Other uses include holding
metal engraving stock,
name badges or other
rectangular shapes.
1
2
9
3
8
4
7
5
6
6
5
7
4
8
3
9
2
1