Visonic KP-250 - Page 32

6. System Configuration
30 D-304269 KP-250 PG2 User’s Guide
5.
or
To assign the tag to another user, for example, "User No. 5", key in [05] or
alternatively click the
or button until the display reads [T05:Tag
(Prox)] and then press to confirm.
DEVICE ENROLLED
T05:Tag (Prox)
☺ Return to step 2
The display reads [ DEVICE ENROLLED ] a "Happy Tune" ☺ sounds and the
display will then change to [ T01:Tag (Prox) ].
5 6
B. To Set Partitions Authorization
∗
∗∗
∗
C.
To Delete a Proximity Tag
1.
TAGS (Proximity)
Enter the [USER SETTINGS] menu, select the [TAGS (Proximity)] option and
press
.
1
2.
ADD NEW
TAG
The display will read [ADD NEW TAG].
Click the button until the display reads [DELETE TAG].
3.
DELETE
TAG
Press .
T01:Tag (Prox)
The display will read [T01:Tag (prox)].
2, 7
4.
Key in the tag number you wish to delete, for example, [05] or alternatively click the
or button until the display reads the tag number, [T05:Tag (prox)].
5.
When the tag you wish to delete appears on the display, press .
<DEL> to delete
The display now reads [<D
EL> to delete].
8
6.
To delete the tag press the button.
∗
Refers to when PARTITIONING is enabled.
6.
T05:PARTITIONS
1



2 3
Use the keypad keys , , to change the status of the partitions 1, 2 &
3, respectively.
9
7.
T05:PARTITIONS
1



2 3



When you are satisfied with the setting, for example, User 5 is authorized with
Partition 1 and 3 only, press to confirm.
☺ Return to step 2 A "Happy Tune" ☺ sounds. The display confirms the Partition setting.
10