Visonic KP-250 User Manual

3. Arming and Disarming the System
D-304269 KP-250 PG2 User’s Guide 9
Special Arming & Disarming Options
In addition to basic arming, KP-250 PG2 provides you wi
th sever
al advanced arming and disarming options:
Switching from ‘HOME’ to ‘AWAY’
You do not have to disarm the system - just press
. The response will be the same as in ARMING AWAY above.
Vacate the premises before the exit delay expires.
Switching from ‘AWAY’ to ‘HOME’
You do not have to disarm the system - just press
.
Since this operation reduces the security level, KP-250 PG2
will ask you to key in your master user code or user code, or to present your proximity tag, thus making sure that you
are an authorized user.
PRESS RESULTING DISPLAY
PRESENT TAG OR
ENTER CODE: 

_
__
_ _
__
_ _
__
_ _
__
_
Enter code / present tag
Code / present tag
ARMING HOME
Move to interior zone ↓ (Exit delay) ↓
HH:MM HOME
ARM indicator flashes on both the KP-250 PG2 keypad and PowerMaster panel during the armed state.
Arming AWAY or HOME ‘Instant’
Pressing during the exit delay will arm the system in the "Instant' mode, i.e. without an entry delay. Therefore, any
detection in any zone will trigger an immediate alarm. To arm AWAY-INSTANT, proceed as follows.
PRESS RESULTING DISPLAY
PRESENT TAG OR
ENTER CODE: 

_
__
_ _
__
_ _
__
_ _
__
_
Enter code / present tag Code / present tag
ARMING AWAY
ARMING INSTANT
PLEASE EXIT NOW
Vacate the premises ↓ (Exit delay) ↓
AWAY
ARM indicator on both the KP-250 PG2 keypad and PowerMaster panel lights during
the armed state.

Visonic KP-250 Specifications

General

Brand	Visonic
Model	KP-250
Category	Keypad
Language	English