6. System Configuration
D-304269 KP-250 PG2 User’s Guide 47
or Click the or button until the display reads the desired setting, for
example, "disable" and press
to confirm.
VOICE OPTION
disable
3
3.
A "Happy Tune" ☺ sounds and the display confirms the saved setting.
4, 5
Additional Information (section B.15)
1
For detailed instructions on how to select the Setting Options – refer to section A.1 and section A.2.
2
a. The display shows the currently selected setting (indicated by a
symbol), for example, "
enable
".
b. You can now enable or disable the voice option using the
or button.
3
The
symbol now appears next to the newly selected option.
4
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
5
If you have selected "
enable
", make sure that the voice prompts can be heard over the panel loudspeaker by
pressing the key on the KP-250 PG2 keypad.
B.16 Adjusting the Volume of the Control Panel or External Box∗
The KP-250 PG2 allows you to adjust the volume of the PowerMaster control panel or an external voice box.
♦ Here you can increase or decrease the loudness.
Carefully read the section titled "Additional Information" according to the indicated references
1
etc – see table at
end of this section.
1.
PANEL VOLUME
Enter the [USER SETTINGS] menu, select the [PANEL VOLUME] option and
press .
1
2.
PANEL VOLUME
2
or
Click the or button repeatedly to increase or decrease the loudness.
PANEL VOLUME
3
3.
A "Happy Tune" ☺ sounds and the display confirms the saved setting.
To Next Page
Loading...
