Visonic KP-250 - Page 35

6. System Configuration
D-304269 KP-250 PG2 User’s Guide 33
B. To Set Partitions Authorization
∗
∗
∗
∗
6.
F05:PARTITIONS
Press to enter partitions mode.
7.
F05:PARTITIONS
1



2



3



Use the keypad keys , , to change the status of the partitions 1, 2 & 3,
respectively.
10
8.
F05:PARTITIONS
1 2



3



When you are satisfied with the setting, for example, User 5 is authorized with
Partition 2 and 3 only, press to confirm.
11
☺ Return to step 2 A "Happy Tune" ☺ sounds. The display confirms the Partition setting.
12
C. To Delete a Keyfob
1. KEYFOBS
Enter the [USER SETTINGS] menu, select the [KEYFOBS] option and press
.
1
2.
ADD NEW
KEYFOB
The display will read [ADD NEW KEYFOB].
Click the button until the display reads [DELETE KEYFOB].
3.
DELETE
KEYFOB
Press .
F01:Keyfob
ID No. 300-5786
The display will read [F01:Keyfob] and the ID number of the keyfob.
3
4.
or
Key in the keyfob number you wish to delete, for example, [06] or alternatively click
the or button until the display reads the keyfob number, for example,
"F06:Keyfob" and "ID No. 300-5799".
F06:Keyfob
ID No. 300-5799
When the keyfob you wish to delete appears on the display, press .
7
5.
<DEL
> to Delete
The display now reads [<DEL> to Delete].
8
6.
To delete the keyfob press the button.
13
∗
Refers to when PARTITIONING is enabled.