6. System Configuration
42 D-304269 KP-250 PG2 User’s Guide
Additional Information (section B.12)
1
For detailed instructions on how to select User Settings – refer to section A.1 and section A.2.
2
This option allows you to program the events to be reported. To program telephone numbers, click the or
button until the display reads the desired option.
3
The display shows the currently selected option (indicated by a
symbol), for example, "
disable report
".
Using the or buttons you can now select the events you wish to be reported to private telephones
numbers according to the options provided in the tables below:
Event Group Option
Events to be reported
disable report
No message will be reported
alarms
Alarm messages only
alerts
Alert messages only
all (-op/cl)
All messages, except arming & disarming
op/cl
Arming and disarming (Open/close) only
all (-alerts)
All messages, except alerts
all
All messages
Note: “
all
” means all events including the L. BAT and AC FAIL trouble messages.
4
The display shows the currently selected option (indicated by a
symbol), for example, "
disable report
".
Using the or buttons you can now select the events you wish to be reported to SMS numbers
according to the options provided in the table below:
Event Group Option
Events to be reported
disable report
No message will be reported
alarms
Alarm messages only
alerts
Alert messages only
all (-op/cl)
All messages, except arming & disarming
op/cl
Arming and disarming (Open/close) only
all (-alerts)
All messages, except alerts
all
5
The
symbol now appears next to the new selected option.
6
a. The display shows the phone number currently programmed in this location (for example, 1032759641). The
cursor blinks on the first digit of the code.
b. If the location is free the display will be blank ( - - - - ).
7
You can move the cursor to the next or previous location (digit) using the or button.
8
Within the private telephone menu, you can now repeat steps 7 – 9 to program or edit another phone number.
Within the SMS menu you can now repeat steps 6 - 8 to program or edit another SMS phone number.
To end this session and return to previous menu options, press the
button.
9
You can select between: "
1 attempt
"; "
2 attempts
"; "
3 attempts
"; "
4 attempts
".
10
You can select between:
"
enable
" – enables 2-way voice communication with private telephones.
"
disable
" - disables 2-way voice communication with private telephones.
To Next Page
Loading...
