EasyManua.ls Logo

VisorJet VJS-B620-2-LPR - Intended Use; Operating Limitations; Unpacking and Checking the Contents; Preparation for Use

Default Icon
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
ВАРШ.201219.009РЭ
3 INTENDED USE
3.1 Operating limitations
3.1.1 The product is designed for round-the-clock continuous operation in outdoor
conditions under the following climatic conditions:
- ambient temperature from -40 to + 60оС;
- atmospheric pressure not lower than 525 mm Hg. (70 kPa);
- relative humidity no more than 95%;
- lack of moisture condensation and aggressive impurities.
3.1.2 The maximum service life and constant readiness of the product for operation is
ensured by:
regular checking of the product technical condition;
compliance with the measures for product operation preparing, provided for in clause
3.3;
systematic control of the product operativeness, as indicated in clause 3.4.2;
immediate elimination of malfunctions arising during operation;
timely repair of the product in accordance with Section 5.
3.2 Unpacking and checking the contents
3.2.1 The product must be packed in a package.
3.2.2 The packed product must be stored in its original packaging under the conditions
specified in Section 6 of this OM
3.2.3 Upon receipt of the product at the place of operating, it is necessary to:
a) open the packing boxes;
b) check the completeness of the product indicated in the VARSH.201219.009PS passport
or in the label;
c) make the necessary entries in the passport VARSH.201219.009PS
3.3 Preparation for use
3.3.1 Safety precautions during preparation for work

Table of Contents