VisorJet VJS-B620-2-LPR - Transportation; When Transporting the Product, the Requirements of the Handling Signs Applied to the Packaging Must be Observed; During Transportation, the Packaging with the Product Must be Securely Fastened to the Means of Transportation; The Climatic Conditions for Transportation in Containers

46
ВАРШ.201219.009РЭ
7 TRANSPORTATION
7.1 The product must be transported in packaging at an atmospheric pressure of at least 60
kPa (450 mm Hg), at an ambient temperature of -25° C to +50° C.
7.2 When transporting the product, the requirements of the handling signs applied to the
packaging must be observed.
7.3 During transportation, the packaging with the product must be securely fastened to the
means of transportation.
7.4 The climatic conditions for transportation in containers must be:
- ambient temperature from -50 to +50 ° C;
- relative humidity 98% or less (at a temperature not higher than 25 ° C);
- atmospheric pressure from 84 to 106.7 kPa (from 630 to 800 mm Hg).
7.5 Сargo handling operation must be carried out in compliance with safety regulations.
7.6 After transportation in below-freezing temperatures, the product will be ready for
operation within 1 hour at temperatures down to -50 ° C.