VISUAL
TECHNOLOGY
INCORPORATED,
RAILROAD
AVENUE,
DUNDEE
PARK,
ANDOVER,
MA
01810
4.12.3 Block Mode Commands
When
the Block Mode Option
is
installed, extra commands and modes
are
provided. This
section details these commands and modes and
their
effect on the terminal.
4.12.3.1 Set Block Mode Command
Code Sequences:
"'# HZ1500+ mode
ESC
m
All
other modes
Block mode may
be
enabled via this command when received
from
the
data-line
or
keyboard.
4.12.3.2
Reset
Block Mode Command
Code Sequences:
"'$ HZ1500+ Mode
ESC
n
All
other modes
Character mode may
be
enabled via this command when received
from
the data-line
or
the
keyboard.
All
Block mode parameters will remain unchanged.
4.12.3.3 Lock
Block Key Command
Code Sequences:
~;
HZ1500+ mode
ESC;
All
other
modes
This command inhibits the operator
from
changing Block/Character mode by depressing the
BL
and CONVERT FUNCTION keys. The operator may change modes
by
using the Set/
Reset
Block Mode command sequences through the keyboard.
4.12.3.4
Unlock Block Key Command
Code Sequences:
~:
HZ1500+ mode
ESC:
All
other modes
This command
allows the operator
to
change between Block/Character modes
by
use
of
the
CONVERT FUNCTION and
BL
keys.
4.12.3.5 Set Line Mode Command
Code Sequences:
~.
HZ1500+ mode
ESCo
All
other modes
This command conditions the
terminal
for
Line mode transmission
as
described
in
section
4.12.2.3.
4.12.3.6 Set
Page
Mode Command
Code Sequences:
'"
( HZ1500+ mode
ESC
9
All
other modes
This command conditions
the
terminal
for
Page
mode transmission
as
described in section
4.12.2.4.
25
To Next Page
Loading...