VISUAL
TECHNOLOGY
INCORPORATED,
RAILROAD
AVENUE,
DUNDEE
PARK,
ANDOVER,
MA
01810
4.12.3.7 Set Batch Mode Command
Code Sequences:
'"
% HZ1500+ mode
ESC
8
All
other
modes
This command conditions
the
terminal for Batch mode transmission
as
described
in
section
4.12.2.5.
4.12.3.8
Set
Protect Command
Code Sequences:
'"
+
HZ
1500+ mode
ESC
6
All
other
modes
This command causes
all
background
data
on
the
screen
to
be protected. See section
4.12.2.1
for
a discussion
of
the
Protect/Un protect mode.
4.12.3.9
Set
Unprotect Command
Code Sequences:
'"
* HZ1500+ mode
ESC
7
All
other
modes
This command causes
all
data on
the
screen, background and foreground,
to
be unprotected.
See section 4.12.2.1
for
a discussion
of
the
Protect/Unprotect mode.
4.12.3.10
Set
Auto-Tab Command
Code Sequences:
'"
8 HZ1500+ mode
ESC
q
All
other
modes
When Auto-Tab
is
set (allowed
in
Protect mode only)
attempted
keyboard data entry into
a protected
field results
in
the
following events:
• The bell
is
sounded.
• The cursor
is
moved
to
the
right and down
to
the
first unprotected position.
• The keyboard character
is
entered
at
this unprotected position.
• The cursor
is
advanced one position.
4.12.3.11 Reset Auto-Tab Command
Code Sequences:
'"
9
HZ
1500+ mode
ESC
S
All
other
modes
When Auto-Tab
is
reset, attempted keyboard
data
entry into a protected field results
in
the
following events.
• The bell
is
sounded.
• The cursor
is
not
moved.
• The keyboard character
is
not
entered on
the
screen.
26
To Next Page
Loading...