Vitrek V4 - Page 35

Vitrek V4 – Electrical Safety Tester USER MANUAL
34
:DCWStanding:CMINimum <NR2> Set the DCW test minimum current
:DCWStanding:CMINimum? Query the DCW test minimum current
:DCWStanding:CMAXimum <NR2> Set the DCW test maximum current
:DCWStanding:CMAXimum? Query the DCW test maximum current
:DCWStanding:RTIMe <NR2> Set the DCW ramp time
:DCWStanding:RTIMe? Query the DCW ramp time
:DCWStanding:TTIMe <NR2> Set the ACW test time
:DCWStanding:TTIMe? Query the ACW test time
:IRESistance:VOLTage <NR2> Set the IR test voltage
:IRESistance:VOLTage? Query the IR test voltage
:IRESistance:RMINimum <NR2> Set the IR test minimum resistance
:IRESistance:RMINimum? Query the IR test resistance
:IRESistance:RMAXimum <NR2> Set the IR test minimum resistance
:IRESistance:RMAXimum? Query the IR test resistance
:IRESistance:TTIMe <NR2> Set the IR test time
:IRESistance:TTIMe? Query the IR test time
:GBONd:CURRent <NR2> Set the GB test current
:GBONd:CURRent? Query the GB test current
:GBONd:RMINimum <NR2> Set the GB test minimum resistance
:GBONd:RMINimum? Query the GB test resistance
:GBONd:RMAXimum <NR2> Set the GB test minimum resistance
:GBONd:RMAXimum? Query the GB test resistance
:GBONd:TTIMe <NR2> Set the GB test time
:GBONd:TTIMe? Query the GB test time
Table 3: Status Commands
Commands Explanation
*CLS Clears the status data structures.
*ESE <NR1> Sets the Event Status Enable Register
(ESER).
*ESE? Returns contents of Event Status Enable
Register (ESER).
*ESR? Returns and clear the contents of Standard
Event Status Register (SESR).
*SRE <NR1> Sets contents of Service Request Enable
Register(SRER).
*SRE? Returns contents of Service Request